Roper ITW4700YQ1 Washing Machine Operation Manual

The Roper ITW4700YQ1 is a high-efficiency top-loading automatic washing machine designed for superior cleaning and energy savings. It features an agitator with Deep Clean option, lid lock safety, and cycles like Normal, Quick Wash, Delicates, and Bulky Items. Dispensers for bleach and softener are included. This manual provides key specifications, operation instructions, and installation guidance for optimal performance.

1. Key Specifications 2. Operation Instructions 2.1. Initial Setup 2.2. Operating the Washing Machine 2.3. Cycle Selection 2.4. Laundry Tips 2.5. Troubleshooting 3. Installation Instructions 3.1. Remove Old Washing Machine 3.2. Installing New Washing Machine 3.3. Leveling the Machine 3.4. Electrical and Water Connections

Key Specifications

Type: High-efficiency top-loading automatic washing machine with agitator
Compatibility:
- Suitable for cottons, synthetics, delicates, bulky bedding, and heavy-duty loads
- Not recommended for items cleaned with flammable solvents
Power Source:
- Electrical: 120 V AC, 60 Hz, grounded 3-prong outlet, 15 A circuit
- Water Supply: Hot and cold water faucets within 4 ft (1.2 m), pressure 20-120 psi
Electrical Rating:
- Motor: High-efficiency variable speed
- Spin Speed: Up to 750 RPM
- Water Levels: Auto-sensing Deep Water Wash option
- Temperature Settings: Hot, Warm, Cool, Cold
Capacity: 3.5 cu. ft. (tub volume)
Dimensions: 27" W x 42" H x 28" D (68.6 cm x 106.7 cm x 71.1 cm)
Features:
- Lid lock with indicator
- Liquid chlorine bleach dispenser
- Fabric softener dispenser
- Deep Clean option for extra agitation
- Soil Level selection
- Cycle signal (end-of-cycle chime)
- Self-cleaning lint trap
Operating Conditions:
- Temperature: 34°F to 120°F (1°C to 49°C)
- Humidity: Non-condensing
Cycles:
- Normal, Quick Wash, Delicates, Bulky Items, Clean Washer, Drain & Spin

Operation Instructions

Initial Setup

1. Check Components: Verify hoses, power cord, and manual are included. Read safety instructions thoroughly.
2. Power On: Connect to grounded outlet. Turn on water faucets.
3. Configure Settings:

Select Normal cycle, Hot temperature, and run empty with 1 cup bleach for tub cleaning.
Test controls: Cycle selector, Temp, Soil Level, Options.

4. Test Run: Complete a full empty cycle to inspect for leaks and verify operation.

Operating the Washing Machine

1. Sort Laundry: Group by color, soil, fabric type, and size. Refer to Laundry Tips.
2. Add Detergent: Pour measured HE detergent into basket; avoid overuse.
3. Load Clothes: Distribute evenly up to fill line; activate Deep Water if needed.
4. Select Settings: Choose cycle, temp, soil level, and options. Close lid securely.
5. Start Cycle: Press Power then Start/Pause. Lid locks; lights indicate status. Pause by pressing button; lid unlocks post-stop.
6. End Cycle: Unload immediately; press Power to turn off.

Cycle Selection

Choose cycle for best results; options like Deep Clean add extra wash time.

Normal: Cottons/linens; Heavy/Normal/Light soils; Hot/Warm/Cool/Cold; High spin.
Quick Wash: Lightly soiled loads; Warm/Cool/Cold; 30-min cycle; Low spin.
Delicates: Lingerie/silks; Light soil; Warm/Cold; Low spin; gentle agitation.
Bulky Items: Bedding/towels; Normal soil; Warm/Cool; High spin; extra rinse option.
Clean Washer: Monthly maintenance; Hot; no load, with bleach.
Drain & Spin: Removes water; High spin; no fill.

Note: Auto-sensing adjusts water; pauses for balancing.

Laundry Tips

Sorting: Separate loads to prevent color bleeding; lint givers from receivers.
Pre-Treating: Apply stain removers before washing.
Detergent: Use HE for efficiency; measure by load size.
Bleach: Add to dispenser post-fill; chlorine for whites only.
Softener: Fill dispenser to line; dilutes automatically.
Load: Leave space for tumbling; even distribution reduces vibration.
Temperature: Match to fabric; cold saves energy.
Care: Run Clean Washer monthly; wipe exterior.

Troubleshooting

Doesn't Start: Check power, lid closed, Start pressed; reset breaker.
No Fill: Faucets on? Hoses connected? Screens clogged?
Leaking: Inspect hoses/valves; level machine; overload.
Shaking: Unbalanced load; adjust feet; floor supports weight.
Slow Drain: Hose height; clogs in trap/pump.
Long Cycles: Deep Clean/Soil Level selected; sensing load.
Wrong Temp: Hoses swapped; run hot/cold separately.
Residue on Clothes: Excess detergent; non-HE use; low water level.
Lid Won't Open: Cycle active; pause and wait; cancel if stuck.
Odor: Clean cycle; less detergent; dry tub after use.

Installation Instructions

Warning: Risk of shock/fire/injury—unplug and shut off water before starting. Ground properly; install on stable floor.

Remove Old Washing Machine

Unplug and turn off water.
Disconnect hoses and drain.
Remove shipping bolts if any.
Clear space and dispose responsibly.

Installing New Washing Machine

Unbox and discard materials.
Position with 1" rear/side clearance.
Attach hoses: Hot/cold with washers.
Secure drain hose (30-96" height).
Level appliance.
Connect power; test fill/drain.

Leveling the Machine

Use level on top.
Turn feet to even all corners.
Secure locknuts.
Test run; adjust post-install.

Electrical and Water Connections

15 A grounded circuit; no adapters. Water 20-120 psi; flush lines first.

Connection Type	Description
Electrical	3-prong grounded; 120V/60Hz dedicated
Hot Water Inlet	Hot faucet; ≤120°F; anti-kink
Cold Water Inlet	Cold faucet; 20-120 psi
Drain	Standpipe/laundry sink; secure clip

Caution: Check leaks; winterize if freezing risk.