Roper RAB2121PW Washing Machine Operation Manual

The Roper RAB2121PW is a compact, white top-loading automatic washing machine perfect for apartments or small households. It offers basic yet reliable features like selectable water levels, temperature options, and essential cycles for everyday laundry needs. This manual covers key specifications, operation, and installation for best results.

1. Key Specifications 2. Operation Instructions 2.1. Initial Setup 2.2. Operating the Washing Machine 2.3. Cycle Selection 2.4. Laundry Tips 2.5. Troubleshooting 3. Installation Instructions 3.1. Remove Old Washing Machine 3.2. Installing New Washing Machine 3.3. Leveling the Machine 3.4. Electrical and Water Connections

Key Specifications

Type: Compact top-loading automatic washing machine (white finish)
Compatibility:
- Ideal for small loads of cottons, delicates, and mixed fabrics
- Not suitable for large bulky items or dry-clean only materials
Power Source:
- Electrical: 120 V AC, 60 Hz, 15 A dedicated circuit
- Water Supply: Standard hot/cold faucets within 4 ft (1.2 m)
Electrical Rating:
- Motor: 1/4 HP, single speed
- Wash/Spin: Standard speed
- Water Levels: Mini, small, medium
- Temperature: Hot, warm, cold
Capacity: 1.9 cu. ft.
Dimensions: 23" W x 36" H x 22" D (58.4 cm x 91.4 cm x 55.9 cm)
Features:
- Integrated bleach dispenser
- Manual lint screen
- Easy-turn cycle selector
- Signal bell at cycle end
- Porcelain tub for durability
Operating Conditions:
- Temperature: 34°F to 110°F (1°C to 43°C)
- Humidity: 90% non-condensing max
Cycles:
- Regular (heavy/light duty)
- Delicate
- Drain/Spin

Operation Instructions

Initial Setup

1. Inspect Package: Unpack and check for hoses, manual, and components.
2. Connect Power: Plug into a grounded 3-prong outlet; ensure faucets are accessible.
3. Prepare Machine:

Set water level to medium and temperature to warm for initial test.
Remove and rinse lint screen located under agitator cap.

4. Test Cycle: Run a short Regular cycle empty with hot water to detect leaks.

Operating the Washing Machine

1. Prepare Load: Sort items by type and soil; consult Laundry Tips.
2. Dispense Detergent: Add measured amount directly to tub.
3. Load Items: Distribute evenly, not exceeding water line.
4. Set Controls: Select cycle, water level, and temp; close lid.
5. Run Cycle: Turn knob to start; machine will fill, agitate, rinse, and spin. Advance manually if pausing.
6. Finish: Unload promptly to avoid wrinkles.

Cycle Selection

Tailor cycle to fabric and soil level:

Regular Heavy: Sturdy cottons/towels; 12 min wash; hot/warm.
Regular Light: Lightly soiled; 8 min wash; warm/cold.
Delicate: Fine washables; slow agitation; cold/warm; 6 min.
Drain/Spin: Quick water removal; no wash.

Note: Timer advances automatically; lid switch halts operation if open.

Laundry Tips

Sorting: Group by color, weight, and lint type for best results.
Stain Removal: Pre-treat with suitable agents before loading.
Detergent Amount: Follow package guidelines; less for small loads.
Bleach Usage: Pour into dispenser during fill; use sparingly on whites.
Overloading: Prevent by allowing free movement of clothes.
Energy Efficiency: Opt for cold rinses and full loads.
Lint Screen: Clean after every use to maintain performance.

Troubleshooting

Does Not Start: Verify power supply and lid closure.
Insufficient Water: Check inlet hoses and faucets; clean screens.
Water Leakage: Inspect connections; ensure level placement.
Excessive Noise: Balance load; secure transit bolts removed.
Does Not Drain: Clear drain hose; check pump filter.
Timer Stuck: Advance manually; unplug for reset.
Fabrics Not Clean: Increase water level or temp; add pre-wash.

Installation Instructions

Warning: Turn off power and water before proceeding. Follow local codes for safe installation.

Remove Old Washing Machine

Disconnect electrical plug and water lines.
Detach drain hose from sink or standpipe.
Remove any shipping restraints.
Wipe down installation area.

Installing New Washing Machine

Remove packaging and tape from components.
Position unit with adequate space for hoses.
Attach inlet hoses to faucets (hot to hot, cold to cold).
Route drain hose to proper height (24-72").
Level the unit.
Connect power and test for leaks.

Leveling the Machine

Place bubble level on top panel.
Rotate front legs to achieve even stance.
Secure with lock nuts.
Confirm stability after test cycle.

Electrical and Water Connections

Requires 15 A grounded outlet. Water pressure 20-100 psi recommended.

Connection Type	Description
Electrical	120V grounded outlet; avoid extensions
Hot Water	Connect to hot line; max 120°F
Cold Water	Connect to cold line; check for kinks
Drain	Secure to pipe; prevent siphoning

Caution: Run test cycle to verify all connections.