Roper RAB2121PW1 Washing Machine Operation Manual

The Roper RAB2121PW1 is a compact, white top-loading automatic washing machine optimized for small living spaces and efficient laundry routines. It includes user-friendly controls for water levels and temperatures, along with cycles tailored for regular and delicate loads. This manual details key specifications, operation instructions, and installation steps for reliable use.

1. Key Specifications 2. Operation Instructions 2.1. Initial Setup 2.2. Operating the Washing Machine 2.3. Cycle Selection 2.4. Laundry Tips 2.5. Troubleshooting 3. Installation Instructions 3.1. Remove Old Washing Machine 3.2. Installing New Washing Machine 3.3. Leveling the Machine 3.4. Electrical and Water Connections

Key Specifications

Type: Compact top-loading automatic washing machine (white)
Compatibility:
- Designed for small loads of everyday fabrics, cottons, and delicates
- Avoid use with oversized items or solvent-based cleaners
Power Source:
- Electrical: 120 V AC, 60 Hz, 15 A circuit
- Water Supply: Hot and cold inlets, 4 ft (1.2 m) max distance
Electrical Rating:
- Motor: 1/4 HP single-speed
- Wash Action: Standard agitation and spin
- Water Levels: Mini, small, medium selectable
- Temperature Control: Hot, warm, cold
Capacity: 1.9 cu. ft. (tub capacity)
Dimensions: 23" W x 36" H x 22" D (58.4 cm x 91.4 cm x 55.9 cm)
Features:
- Bleach compartment in agitator
- Removable lint filter
- Rotary cycle dial
- Completion buzzer
- Agitator-based cleaning
Operating Conditions:
- Temperature: 34°F to 110°F (1°C to 43°C)
- Humidity: Non-condensing environment
Cycles:
- Regular (adjustable time)
- Delicate (gentle cycle)
- Rinse and Spin

Operation Instructions

Initial Setup

1. Verify Contents: Ensure all hoses, fittings, and guide are unpacked.
2. Electrical Connection: Insert plug into a standard grounded outlet.
3. Initial Preparation:

Choose small water level and cold temperature for startup.
Access lint filter via agitator and rinse clean.

4. Diagnostic Run: Execute an empty Delicate cycle to assess functionality.

Operating the Washing Machine

1. Load Preparation: Categorize laundry per guidelines in Laundry Tips.
2. Detergent Addition: Dose according to load; place in tub.
3. Filling Tub: Add clothes loosely below max fill indicator.
4. Control Selection: Dial cycle, set level and temp; secure lid.
5. Cycle Initiation: Rotate knob to begin; monitor for normal sounds.
6. Completion: Retrieve laundry without delay.

Cycle Selection

Match cycle to load requirements:

Regular: General use; 10 min agitation; selectable hot/warm/cold.
Delicate: Fragile items; reduced speed; cold preferred.
Rinse and Spin: Refreshing rinse; fast spin for drying.

Note: Manual timer adjustment available on Regular.

Laundry Tips

Categorization: Divide by hue, texture, and dirtiness.
Spot Treatment: Address marks prior to washing.
Soap Dosage: Precise measurement prevents residue.
Bleach Application: Introduce via slot during water intake.
Capacity Limits: Maintain room for circulation.
Temp Choices: Warmer for tough stains, cooler for savings.
Filter Maintenance: Rinse post-cycle routinely.

Troubleshooting

Failure to Operate: Confirm outlet power and lid engagement.
Low Water Flow: Examine faucets and inlet filters.
Dripping Issues: Re-secure hoses; verify alignment.
Unsteady Motion: Redistribute items; adjust legs.
Drain Blockage: Inspect hose for obstructions.
Erratic Timer: Reset by disconnecting power briefly.
Subpar Results: Verify settings; consider pre-soak.

Installation Instructions

Warning: Isolate electricity and water sources prior to work. Adhere to safety standards.

Remove Old Washing Machine

De-energize and isolate water.
Separate supply and drain lines.
Discard packing elements.
Prepare site for new unit.

Installing New Washing Machine

Extract from carton; dispose of waste.
Site with ventilation allowance.
Link hoses correctly (hot/cold).
Position drain at 24-72" elevation.
Achieve level positioning.
Power up and leak inspect.

Leveling the Machine

Employ level tool atop unit.
Modify leg heights uniformly.
Fasten retaining hardware.
Validate after operation.

Electrical and Water Connections

15 A grounded receptacle needed. Inlet pressure: 20-100 psi.

Connection Type	Description
Electrical	Standard 120V ground; direct plug
Hot Water	Hot supply; cap at 120°F
Cold Water	Cold supply; inspect bends
Drain	Pipe mount; anti-backflow

Caution: Perform leak test post-assembly.