Roper RAB4132AL1 Washing Machine Operation Manual

The Roper RAB4132AL1 is a versatile top-loading automatic washing machine built for family use, featuring dual-speed operation, customizable water levels, and a range of cycles like Normal, Permanent Press, and Delicates. It includes built-in dispensers for enhanced convenience. This manual offers comprehensive specifications, usage directions, and setup advice for maximum reliability.

1. Key Specifications 2. Operation Instructions 2.1. Initial Setup 2.2. Operating the Washing Machine 2.3. Cycle Selection 2.4. Laundry Tips 2.5. Troubleshooting 3. Installation Instructions 3.1. Remove Old Washing Machine 3.2. Installing New Washing Machine 3.3. Leveling the Machine 3.4. Electrical and Water Connections

Key Specifications

Type: Dual-speed top-loading automatic washing machine
Compatibility:
- Supports cottons, permanent press, knits, and delicates
- Exclude flammable or oversized items
Power Source:
- Electrical: 120 V AC, 60 Hz, 15 A fused circuit
- Water Supply: Hot and cold, 20-120 psi pressure
Electrical Rating:
- Motor: 1/2 HP
- Speeds: High/low agitation and spin
- Water Levels: Extra small, small, medium, large
- Temperature: Hot, warm, cold
Capacity: 3.4 cu. ft.
Dimensions: 27" W x 42" H x 27" D (68.6 cm x 106.7 cm x 68.6 cm)
Features:
- Automatic bleach and softener dispensers
- Self-cleaning lint filter
- Extra rinse option
- Load balance sensing
Operating Conditions:
- Temperature: 32°F to 120°F (0°C to 49°C)
- Humidity: Non-condensing
Cycles:
- Normal, Permanent Press, Knits, Delicates, Soak/Prewash

Operation Instructions

Initial Setup

1. Assemble Parts: Attach hoses securely; review all docs.
2. Activate: Connect power; ensure water flow.
3. Calibrate:

Select large level, hot temp for flush cycle.
Inspect dispensers for proper seating.

4. Verify: Empty Normal cycle run.

Operating the Washing Machine

1. Classify Load: Per fabric/soil; see Tips.
2. Insert Agents: Detergent to tub; bleach/softener to slots.
3. Place Garments: Loosely, below max line.
4. Configure: Cycle, level, temp, options.
5. Commence: Pull timer knob.
6. Finalize: Unload immediately.

Cycle Selection

Normal: Sturdy loads; high speed; 12 min.
Permanent Press: Synthetics; low speed; cold rinse.
Knits: Soft fabrics; gentle; warm.
Delicates: Fragile; slow; cold.
Soak/Prewash: Heavy soils; timed hold.

Laundry Tips

Sort by color/lint.
Treat stains early.
Dose detergent accurately.
Use cold for colors.
Balance loads.
Monthly tub clean.

Troubleshooting

Won't Power: Outlet/lid.
No Inlet: Valves/hoses.
Drip: Seals/level.
Rattle: Uneven load.
Stagnant: Drain clog.
Weak Clean: Cycle/temp.

Installation Instructions

Warning: Deactivate utilities prior.

Remove Old Washing Machine

Power off/unplug.
Detach lines.
Prep area.

Installing New Washing Machine

Unpack.
Site placement.
Hose linkage.
Drain affix.
Even stance.
Leak trial.

Leveling the Machine

Tool placement.
Foot tweak.
Nut secure.
Post-test check.

Electrical and Water Connections

Grounded 15 A. 20-120 psi water.

Connection Type	Description
Electrical	120V 3-prong
Hot	Hot inlet
Cold	Cold inlet
Drain	96" max height